FAQs & Troubleshooting

Close

DCP-7060D

FAQs & Troubleshooting

FAQs & Troubleshooting

DCP-7060D

Not your product?

Date: 04/25/2013 ID: faq00000307_017

JAM TRAY 1

Please follow the steps below to solve the problem:


NOTE: Illustrations shown below are from representative product and may differ from your Brother machine.

 

  1. Pull the paper tray completely out of the machine.
    Pull the paper tray out
  2. Use both hands to slowly pull out the jammed paper.

    Pull out the jammed paper

    If the paper cannot easily be removed in this direction, stop and follow the instructions for Paper is jammed inside the machine. Please refer to FAQ, "JAM INSIDE".

    Pulling out the jammed paper downwards allows you to remove the paper more easily.


  3. Make sure the paper is below the maximum paper mark (1) of the paper tray. While pressing the green paper-guide release lever, slide the paper guides to fit the paper size. Make sure that the guides are firmly in the slots.
    The maximum paper mark

  4. Put the paper tray firmly back in the machine.

Related FAQs

Related Models

DCP-7060D, DCP-7065DN, HL-2280DW, MFC-7360N, MFC-7365DN, MFC-7460DN, MFC-7860DW

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.