Setting the ribbon/tape length varies based on the template you choose.

If you're printing text on either end of the ribbon/tape:

1. Below the print preview, tap [Tape length].
2. Tap the [Set tape length in inch] toggle to turn it ON, and then set the tape length.
3. Tap [Done] when finished.

If you want to repeat the same text on the ribbon/tape:

1. Below the print preview, tap [Text length].
2. Tap the [Set text length in inch] toggle to turn it ON.
3. Set the text length (how long you want each text section to be).
   The font size will adjust automatically based on the text length you set.
   
4. Tap [Done] when finished.
5. Tap [Print].
6. Under [Ribbon/tape length], set the overall length you want for the printed ribbon/tape.

   Depending on the ribbon/tape length you set, some text may be cut off.

   Check the print preview screen before printing.

Setting ribbon/tape length when using a Pattern:

1. Select a pattern from the template list.
2. Below the print preview, tap [Print].
3. Under [Ribbon/tape length], set the overall length you want for the printed ribbon/tape.
4. Tap [Done] when finished

   Part of the pattern may be cut off depending on the ribbon/tape length you set.