TD-2120N
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/lptd2120neus.jpg)
TD-2120N
Date: 11/01/2022 ID: faqp00001444_004
How do I reset network setting?
![]() |
1. POWER indicator 2. ![]() 3. Media exit 4. RD/Media Roll compartment top cover 5. STATUS indicator 6. ![]() 7. ![]() 8. Cover release lever |
-
To reset network settings and turn APIPA ON
- Press and hold the Power button to turn the printer off.
- Press and hold the Feed button and the Power button, until the POWER indicator lights in orange and the STATUS indicator blinks in green.
- While holding down the Power button, press the Feed button 2 times.
-
Release the Power button.
All network settings will be reset.
-
To reset network settings and turn APIPA OFF
- Press and hold the Power button to turn the printer off.
- Press and hold the Feed button and the Power button, until the POWER indicator lights in orange and the STATUS indicator blinks in green.
- While holding down the Power button, press the Feed button 4 times.
-
Release the Power button.
All network settings will be reset.
APIPA --- If you do not assign an IP address manually (using the BRAdmin software) or automatically (using a DHCP/BOOTP/RARP server), the Automatic Private IP Addressing (APIPA) protocol will automatically assign an IP address from the range 169.254.0.1 to 169.254.254.254.
TD-2120N, TD-2125N, TD-2125NWB, TD-2130N, TD-2135N, TD-2135NWB
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.