CE8100

FAQs & Troubleshooting

CE8100

Not your product?

Date: 10/15/2020 ID: faqh00101090_002

E-mail

The machine does not make stitches

Needle is turned, bent or the point is dull.

Replace the needle.
Refer to How do I change the needle?
Bobbin is set incorrectly.

Reset the bobbin thread correctly.
Refer to How do I install the bobbin wound with thread ?
Upper threading is incorrect.

Check the steps for threading the machine and rethread the machine correctly.
Refer to How do I thread my machine?

Related FAQs

Related Models

BB370, BM2800, BM3700, BM3850, BX2925PRW, BX3000, CE1008, CE1100PRW, CE1125PRW, CE1150, CE4400, CE-5000/5000PRW, CE-5500/CE-5500PRW, CE7070PRW, CE8080/CE8080PRW, CE8100, CP100X, CP2160F, CP2160L, CP2160M, CP2160P, CP2160R, CP2160W, CP60X, CP-6500, CP-7500, CP80X, CS-100T/4000/5000H, CS5055, CS5055PRW, CS-6000/6000b/6000t/6000i, CS7000i, CS7000X, CS7130, CS7205, CS8800PRW, CS9100, DZ2400, DZ2750, DZ3000, DZ3400, ES-2000/2000T, EX-660, FB1757T, FB1757X, GQ3700, GX37, HC1850, HS-2000, HS-2500, HS-3000, JS2135, JS60, JX2517, JX3135F, LX2500, LX2763, LX3817, LX3817A, LX3817G, MZ53, PS100, PS200T, PS300T, SB1000T, SB170, SB530T, SB700T, SC3000, SC6600, SC707, SC9500, SM1400, SM1704, SM1738D, SM2700, SM3701, SM8270, SQ-9000, SQ9050, SQ9185, SQ9285, SQ9310, ST371HD, ST531HD, VX1445, VX3250F, XL2800, XL3700, XL5600i, XM1010, XM2701, XM3700, XR1300, XR1355, XR3140, XR3240, XR3340, XR3774, XR4040, XR53, XR6060, XR-7700, XR-9000, XR9500PRW, XR9550/XR9550PRW, XS2070, XS2080, XS2100, XS3109, XS37

If you need further assistance, please contact Brother customer service:

Go to the Contact Us section

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Very helpful

Helpful

Not helpful

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit