FAQs & Troubleshooting

Close

Innov-is 6750D

FAQs & Troubleshooting

FAQs & Troubleshooting

Innov-is 6750D

Not your product?

Date: 05/14/2015 ID: faqh00000575_000

How do I insert the bobbin case in the machine?

  • Be sure to unplug the machine before you replace the bobbin case in it. Otherwise, electric shock or injury may result.
  • Be sure that the bobbin case is correctly installed. Otherwise, the needle may break.
  • Never use a bobbin case that is scratched; otherwise, the upper thread may become tangled, the needle may break, or sewing performance may suffer.
    For a new bobbin case (part code: XC3153-251 (green marking on the screw), XC8167-451 (no color on the screw)), contact your nearest authorized dealer or service center.
  • If the needle plate has been removed it is especially important to reinstall the needle plate and tighten the screws prior to installing the bobbin case.
 

 

Insert the bobbin case so that the projection on the bobbin case aligns with the spring.

 

How to insert the bobbin case in the machine

1 Projection          2 Spring

Related FAQs

Related Models

Innov-is 6000D, Innov-is 6700D, Innov-is 6750D

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.