FAQs & Troubleshooting

Close

PE-700/750D

FAQs & Troubleshooting

FAQs & Troubleshooting

PE-700/750D

Not your product?

Date: 02/16/2021 ID: faqh00000005_000

How do I attach the embroidery frame?

 

  1. With the embroidery presser foot in the raised position, press the embroidery frame under the presser foot.

    Pass the embroidery frame

    1 embroidery carriage

    2 presser footer lever

     

  2. Place your left hand on the embroidery carriage while attaching the embroidery frame with your right hand.

    Use caution when gripping the embroidery carriage as there are exposed screws at the rear.

     

  3. Press the lever on the embroidery carriage to the left to attach the embroidery frame.
    Follow instruction below.

    pushing a lever on frame holder

    1 Lever on frame holder of embroidery carriage

     

  4. Install the front mounting bracket of the frame to the front pin of the frame holder first, and then install the back mounting bracket to the back pin.

    Install the front mounting bracket of frame

    1 Mounting brackets of frame

    2 Pin of frame holder

     

  5. Confirm that the embroidery frame is secured to the frame holder.

 

Video instructions

  • This movie is being streamed from YouTube.

 

Related Models

DZ820E, Innov-is 1000, Innov-is 1200, Innov-is 1250D, PE-700/750D, PE-700II/750D(USB), PE-770, PE-780D, SB7900E, SB8000, SE1800

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.