MFC-L6800DW
FAQs & Troubleshooting |
MFC-L6800DW
Date: 08/29/2023 ID: faq00100800_000
My printer takes a long time to start printing when using Airprint. (iOS 16)
Try one of the following methods to enable IPv6:
> Using the Touchscreen (Touchpanel models)
> Using the Touchscreen (1 Line LCD models)
Using Web Based Management
-
Print the Network Configuration report.
> Click here to see how to print the Network Configuration Report. - On a computer that's connected to the same network as your machine, open a web browser.
-
Type the IP address listed on the Network Configuration report into your browser's address bar, and then press Enter.
The machine's web interface will open. (For example: http://192.168.1.105) -
Click Network > Wired or Wireless > IPv6 (Wired) or IPv6 (Wireless).
-
Select Enabled, and then click submit.
Using the Touchscreen (Touchpanel models)
- Press the Settings menu.
- Press Network.
- Select Wired LAN or WLAN.
- Select TCP/IP.
- Press ▲ or ▼ to select IPv6.
- Select On.
- Turn the machine off and then on again.
Using the Touchscreen (1 Line LCD models)
- Press ▲ or ▼ to select Settings.
- Press ▲ or ▼ to select Network.
- Select Wired LAN or WLAN and press OK.
- Press ▲ or ▼ to select TCP/IP and press OK.
- Press ▲ or ▼ to select IPv6 and press OK.
- Press ▲ or ▼ to select On and press OK.
- Turn the machine off and then on again.
DCP-L5500DN, DCP-L5600DN, DCP-L5650DN, HL-L5100DN, HL-L5200DW(T), HL-L6200DW(T), HL-L6250DW, HL-L6300DW, HL-L6400DW(T), MFC-L5700DW, MFC-L5800DW, MFC-L5850DW, MFC-L5900DW, MFC-L6700DW, MFC-L6750DW, MFC-L6800DW, MFC-L6900DW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.