MFC-J5830DW(XL)
FAQs & Troubleshooting |
MFC-J5830DW(XL)
Date: 07/31/2024 ID: faq00100347_501
Load Documents in the Automatic Document Feeder (ADF)
Use paper that is within the sizes and weights shown in the table. Always fan the pages before placing them in the ADF.
Document Sizes and Weights
Length *1: | 5.8 to 14.0 in. (148 to 355.6 mm) |
Width: | 4.1 to 8.5 in. (105 to 215.9 mm) |
Paper Weight: | 17 to 24 lb (64 to 90 g/m²) |
- IMPORTANT
-
DO NOT pull on the document while it is feeding.
DO NOT use paper that is curled, wrinkled, folded, ripped, stapled, paper clipped, pasted or taped.
DO NOT use cardboard, newspaper or fabric.
Make sure documents with correction fluid or written in ink are completely dry.
Your 2-sided documents can be copied up to Letter size, and can be faxed or scanned up to Legal size using the ADF.
- Fan the pages well.
- Adjust the paper guides (1) to fit the document size.
- Place your document face up in the ADF, as shown in the illustration, until you feel the document touch the feed rollers and the machine beeps.
If you loaded a small size document and cannot remove it, lift the ADF document support (1), and then remove the document.
- IMPORTANT
- DO NOT leave any documents on the scanner glass. If you do this, the ADF may jam.
Related FAQs
MFC-J5330DW, MFC-J5830DW(XL), MFC-J5930DW
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.