HL-S7000DN
![]() |
Preguntas frecuentes y Solución de problemas |
![](/g/b/img/product/hls7000dn_us_eu_as.jpg)
HL-S7000DN
Fecha: 11/02/2012 ID: faq00003007_000
Jam C Inside
Please follow the steps below to clear the error message "Jam C Inside".
NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.
- Remove any printed pages from the output paper tray.
- Pull the top cover release lever (1) as shown and open the top cover.
- Slowly pull the paper tray out until it stops. Then slightly lift the front of the tray and pull the tray out of the machine.
- Open the MP tray and lower it gently.
- Pull both green paper roller tabs toward you to release the paper.
- Hold the left and right edges of the jammed paper near the inside of the machine and pull it out.
- Remove the jammed paper from the machine.
DO NOT touch the parts shown in the illustrations. If you do so, the ink may stain your skin.
- Push both the green paper roller tabs toward the back.
- Close the MP tray.
- Put the paper tray firmly back in the machine.
- Close the top cover.
Preguntas frecuentes relacionadas
HL-S7000DN
Si necesita asistencia, contáctese con el servicio al cliente de Brother:
Comentarios sobre el contenido
Para ayudarnos a mejorar el soporte, bríndenos sus comentarios a continuación.
Paso 1: ¿Cómo lo ayudó la información en esta página?
Paso 2: ¿Quiere agregar otros comentarios?
Observe que este formulario solo se utiliza para comentarios.