HL-L2300D
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/hll2300d_us_eu_as.jpg)
HL-L2300D
Date: 03/25/2016 ID: faq00002828_003
What is Toner Continue Mode?
The print life of Brother toner cartridges is based upon their ability to continue to achieve guaranteed print quality. As the toner cartridge is used, the supply of available toner is consumed and the functional components become physically worn. The LED indication to replace toner cartridge flashes when the supply of toner and/or material deterioration reach a level at which the print quality can no longer be guaranteed.
You can continue printing with the toner cartridge beyond its estimated print life by enabling "Continue Mode".
- Continue Mode will force the machine to continue printing after the Toner LED is on or the Status Monitor message indicates Replace Toner.
- Poor print quality may occur when using Continue Mode to print beyond the rated life of the toner cartridge.
- Since Continue Mode allows the toner cartridge to continue to print beyond the estimated life of the cartridge, print quality cannot be guaranteed while printing in this mode.
- While in Continue Mode, the Toner LED will continue to flash or be on and the Status Monitor will continue to indicate the status of the toner cartridge by displaying the Toner Low, Replace Toner, or Toner Ended messages.
-
The Toner and Paper LEDs which are on or the Status Monitor message Toner Ended indicates that Continue Mode was enabled to force the machine to continue printing after the toner cartridge reached the end of its estimated life and now the maximum operational life of the toner cartridge has been reached. The toner cartridge needs to be replaced with a new genuine Brother toner cartridge.
> For the order number (Order No.) of the toner cartridge, please click here to see the Consumables & Options page. - When a new toner cartridge is installed, this mode will be automatically turned off.
To enable or disable Continue Mode, follow the steps below:
- Make sure that the front cover is closed and the power cord is plugged in.
-
Press
(Power On/Off) to turn on the machine and make sure only the Ready LED lights up.
-
Press Go seven times to turn the function On or Off.
All LEDs blink twice when you turn on the Continue Mode.
All LEDs blink once when you turn off the Continue Mode.
HL-L2300D, HL-L2320D, HL-L2400D
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.