MFC-790CW
FAQs & Troubleshooting |
MFC-790CW
Date: 10/21/2008 ID: faq00002210_000
How do I replace the battery?
If your battery performance is getting worse, make sure that you have charged the battery correctly. If the battery performance is still poor, it is time to replace it.
- Use a genuine Brother rechargeable battery . If not, it may cause damage or personal injury.
- DO NOT take off the white plastic that covers the battery.
- After installation, charge the battery for 12 hours.
-
Press the area indicated (1) on the battery cover (2) and slide it off the cordless handset.
-
Remove the old battery and pull out the connector.
-
Insert the connector (1) of the new battery (2) in the direction shown below.
-
Place the battery in the correct position.
-
Slide the battery cover back on.
- Be careful that you do not catch the battery connector cord.
- After replacement, you should set the date and time.
ATTENTION:
The product you have purchased is powered by Nickel Metal Hydride battery which is recyclable.
(For USA)
At the end of their useful lives, under various state and local laws, it is illegal to dispose of this battery into your municipal waste stream. Please call 1-800-8-BATTERY or visit www.rbrc.com for information on how to recycle this battery.
(For Canada)
For more information on how to recycle this battery, please call 1-800-8-BATTERY or visit www.rbrc.com .
FAX-1960C, FAX-2580C, MFC-790CW, MFC-845CW, MFC-885CW, MFC-990CW
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.