DCP-8150DN
FAQs & Troubleshooting |
DCP-8150DN
Date: 01/17/2014 ID: faq00002071_009
Log on as a restricted user when the Secure Function Lock feature is turned ON
To switch between registered restricted users or Public mode when Secure Function Lock is turned on, follow the steps listed below.
Changing to the restricted user Mode:
*If your Brother machine has a touchscreen, please follow the steps under "For touchscreen models" below.
- Hold down the Left arrow key as you press Secure Print.
- Press the Up or Down arrow key to choose your ID. Press OK.
- Enter your four-digit password. Press OK.
- Press Public or xxxxx (where xxxxx is the user's name).
- Press Change User.
- Press the Up or Down arrow key to display your user name. Press your user name.
- Enter your four-digit password. Press OK.
Changing to the Public Mode:
After a restricted user has finished using the machine, it will return to the Public setting in one minute.
You can also exit from the restricted user mode by following the steps below.
*If your Brother machine has a touchscreen, please follow the steps under "For touchscreen models" below.
-
Press the following keys according to the mode you are in:
- Clear when you are in the copy mode.
- (SCAN) when you are in the scan mode.
- The LCD will ask you Go to Public?
- Press 1 to choose Yes.
- Press xxxxx (where xxxxx is the user's name).
- Press Go to Public.
DCP-8110DN, DCP-8150DN, DCP-8155DN
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.