MFC-J4310DW
FAQs & Troubleshooting |
MFC-J4310DW
Date: 09/26/2012 ID: faq00000615_007
Forward a fax to another fax machine when my machine has a mechanical problem.
You can transfer faxes in the memory of your machine if one of the following messages is displayed on the LCD:
- Unable to Clean XX (Clean Unable XX)
- Unable to Init. XX (Init Unable XX)
- Unable to Print XX (Print Unable XX)
- Unable to Scan XX (Scan Unable XX)
- Press to interrupt the error.
- Press (Settings).
- Press the Up or Down arrow key to display Service.
- Press Service.
- Press Date Transfer.
- Press Fax Transfer.
- Do one of the following:
- If the Touchscreen shows No Data, there are no faxes left in the machine's memory.
Press .
- Enter the fax number to which faxes will be forwarded.
- If the Touchscreen shows No Data, there are no faxes left in the machine's memory.
- Press Start.
- If you have not set up your Station ID, you cannot enter fax transfer mode. Please refer to the instructions, What is the "Station ID" and how do I set it?.
- You can send the Fax Journal report to another fax machine.
Press (Settings) and choose Service => Data Transfer => Report Trans. in Step2.
Related FAQs
MFC-J285DW, MFC-J4310DW, MFC-J4410DW, MFC-J4610DW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.