MFC-J430W
 |
FAQs & Troubleshooting |
MFC-J430W
Date: 05/23/2019 ID: faq00000615_004
Forward a fax to another fax machine when my machine has a mechanical problem.
You can transfer faxes in the memory of your machine if one of the following messages is displayed on the LCD:
- Unable to Clean XX (Clean Unable XX)
- Unable to Initialize XX or Unable to Init. XX (Init Unable XX)
- Unable to Print XX (Print Unable XX)
- Unable to Scan XX (Scan Unable XX)
- Press Stop/Exit to interrupt the error temporarily.
- Press Settings or Menu and select Service => Data Transfer => Fax Transfer.
-
Do one of the following:
-
If the LCD shows No Data, there are no faxes left in the machine's memory.
Press Stop/Exit. - Enter the fax number to which faxes will be forwarded.
-
If the LCD shows No Data, there are no faxes left in the machine's memory.
- Press Black Start or Mono Start.
-
If you have not set up your Station ID, you cannot enter fax transfer mode.
> Click here to see how to set up the Station ID. -
You can send the Fax Journal report to another fax machine.
Press Settings or Menu and select Service => Data Transfer => Report Trans. in Step 2.
DCP-J140W, MFC-250C, MFC-255CW, MFC-290C, MFC-295CN, MFC-490CW, MFC-495CW, MFC-5490CN, MFC-5890CN, MFC-5895CW, MFC-6490CW, MFC-J220, MFC-J245, MFC-J265W, MFC-J270W, MFC-J410W, MFC-J415W, MFC-J425W, MFC-J430W, MFC-J435W, MFC-J450DW, MFC-J460DW, MFC-J470DW, MFC-J475DW, MFC-J480DW, MFC-J485DW, MFC-J615W, MFC-J630W, MFC-J6510DW, MFC-J6710DW, MFC-J775DW(XL)
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.