MFC-J6535DW(XL)
FAQs & Troubleshooting |
MFC-J6535DW(XL)
Date: 04/10/2017 ID: faq00000299_502
Set the Date & Time
The LCD displays the date and time. If they are not current, re-enter them. You can add the date and time to each fax you send by setting your Station ID.
MFC-J6530DW/MFC-J6730DW
- Press [Settings].
- Press [Date & Time].
- Press [Date].
- Enter the last two digits of the year on the Touchscreen, and then press [OK].
- Enter two digits for the month on the Touchscreen, and then press [OK].
- Enter two digits for the day on the Touchscreen, and then press [OK].
- Press [Clock Type].
- Press [12h Clock] or [24h Clock].
- Press [Time].
- To enter the time, do one of the following:
- If you selected [12h Clock], enter the time (in 12-hour format) using the Touchscreen, and then press [AM] or [PM].
Press [OK].
- If you selected [24h Clock], enter the time (in 24-hour format) using the Touchscreen.
Press [OK].
(For example, enter 19:45 for 7:45 PM.)
- Press .
MFC-J6535DW/MFC-J6930DW/MFC-J6935DW
- Press [Settings].
- Press [Date & Time].
- Press [Date].
- Enter the last two digits of the year on the Touchscreen, and then press [OK].
- Enter two digits for the month on the Touchscreen, and then press [OK].
- Enter two digits for the day on the Touchscreen, and then press [OK].
- Press [Clock Type].
- Press [12h Clock] or [24h Clock].
- Press [Time].
- To enter the time, do one of the following:
- If you selected [12h Clock], enter the time (in 12-hour format) using the Touchscreen, and then press [AM] or [PM].
Press [OK].
- If you selected [24h Clock], enter the time (in 24-hour format) using the Touchscreen.
Press [OK].
(For example, enter 19:45 for 7:45 PM.)
- Press .
MFC-J6530DW, MFC-J6535DW(XL), MFC-J6930DW, MFC-J6935DW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.