MFC-L3710CW
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/mfcl3710cw_us_eu_as_2.jpg)
MFC-L3710CW
Date: 02/24/2017 ID: faq00000216_026
Colored spots at 94 mm (3.7 in.) intervals or at 29 mm (1.1 in.) intervals
Follow the steps applicable for your case to resolve the issue:
- Case 1: Colored spots at 94 mm (3.7 in.) intervals
- Case 2: Colored spots at 29 mm (1.1 in.) intervals
Case 1: Colored spots at 94 mm (3.7 in.) intervals
-
If the issue is not resolved after printing a few pages, the drum may have foreign material, such as glue from a label, stuck on the drum surface. Clean the drum unit.
> Click here to see how to clean the drum unit. -
Install a new drum unit.
> Click here to see how to replace the drum unit.
Case 2: Colored spots at 29 mm (1.1 in.) intervals
- Identify the color causing the issue and install a new toner cartridge.
-
To identify the color of the toner cartridge and replace toner cartridge, follow the steps below:
- > Click here to print the chart. [345KB/ PDF]
- Compare your printed document with the printed chart to identify the color causing the issue.
-
Replace the toner cartridge of the color.
> Click here to see how to replace the toner cartridge.
HL-EX470W, HL-L3210CW, HL-L3230CDW, HL-L3270CDW, HL-L3290CDW, HL-L8260CDW, HL-L8360CDW(T), HL-L9410CDN, HL-L9430CDN, HL-L9470CDN, MFC-EX670W, MFC-L3710CW, MFC-L3750CDW, MFC-L3770CDW, MFC-L8610CDW, MFC-L8895CDW, MFC-L8900CDW, MFC-L8905CDW, MFC-L9610CDN, MFC-L9630CDN, MFC-L9670CDN
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.