FAQs & Troubleshooting

Close

MFC-8710DW

FAQs & Troubleshooting

FAQs & Troubleshooting

MFC-8710DW

Not your product?

Date: 04/25/2013 ID: faq00000169_002

How do I clear the "Awaiting Redial" message?

There are several reasons this message would appear when sending a fax.


  1. If the fax number you are dialing does not answer or the line is busy, this message will appear. Verify you have the correct fax number and try again.

  2. Verify the telephone line cord is connected from the jack (socket) on the FAX/MFC labeled LINE directly to the WALL jack (socket). Disconnect and reconnect to ensure the connection is secure and solid.

  3. Verify if your Brother machine has a dial tone. For more information, please refer to "How can I verify if my Brother machine has a dial tone?".

  4. If the receiving unit is busy, the sending unit will automatically redial the number within 5 minutes. The sending unit will attempt to redial 1 time after 5 minutes (up to three times at five minutes intervals for Europe and Asia/Oceania regions). If the unit is still busy, the sending unit will display "No Response/ Busy" and print out a report with the same message.

How to redial:
Anytime you want to make a second call to the last number dialed, press Redial/Pause and then Fax Start or Start.

Related FAQs

Related Models

FAX-2820, FAX-2840, FAX-2910, FAX-2920, FAX-2940, MFC-4420C, MFC-4820C, MFC-5200C, MFC-7220, MFC-7225N, MFC-7240, MFC-7340, MFC-7345N, MFC-7360N, MFC-7365DN, MFC-7420, MFC-7440N, MFC-7460DN, MFC-7820N, MFC-7840W, MFC-7860DW, MFC-8220, MFC-8420, MFC-8440, MFC-8460N, MFC-8480DN, MFC-8510DN, MFC-8640D, MFC-8660DN, MFC-8670DN, MFC-8680DN, MFC-8690DW, MFC-8710DW, MFC-8810DW, MFC-8820D, MFC-8820DN, MFC-8840D, MFC-8840DN, MFC-8860DN, MFC-8870DW, MFC-8890DW, MFC-8910DW, MFC-8950DW, MFC-8950DWT

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.