XL-2120/2220/2230/2240
FAQs & Troubleshooting |
XL-2120/2220/2230/2240
Date: 20/11/2012 ID: faqh00000024_000
Why does the upper thread keep breaking?
There could be several reasons why the upper thread keeps breaking.
- The upper thread could be installed incorrectly.
Rethread the machine according to the instructions in the manual.
Please refer to "Upper threading" of "Preparation" category.
- The upper thread tension could be set too tight.
Set the tension to the basic thread tension setting or less.
- Make sure the spool of thread is installed correctly using the correct size spool cap for the size of spool.
One Point Advice Place a spool of thread on a spool pin.
- The combination of needle size, thread size, and fabric is incorrect.
Be sure to use the correct needle and thread size for the fabric you are sewing.
(Example: Denim-size 16 needle and 40-50heavy-duty threads).
One Point Advice Combination of fabric, thread and needle
Related FAQs
BC-2500, CAMPUS 300, DS-140, ES-2000, ES-2400, FS101, FS155, Innov-is 1000, Innov-is 1250, Innov-is 1250D, Innov-is 1500D/1500, Innov-is 20, Innov-is 4000D/4000, Innov-is 950, Innov-is 955, Innov-is 980D, Innov-is I / Innov-is 6000D, LS-2125/2160, LS-2150, LS-2720, NX-250, NX-450, NX-650, QC-1000, Rose Wine, SF100, SF200, SF250, SF300, Vesta, Vesto, XL-2120/2220/2230/2240, XL-2600/2620/2630, XL3500
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.