JS1400
 |
FAQs & Troubleshooting |
JS1400
Date: 12/12/2018 ID: faqh00000017_002
How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- Use only the ungummed hook-and-loop fastener which is for sewing. If the glue is attached to the needle or the bobbin hook race, it may cause malfunction.
- If the hook-and-loop is sewn with the thin needle (65/9-75/11), the needle may bend or break.
- Before start sewing, baste together the fabric and the hook-and-loop fastener.
Make sure that the needle passes through the hookand-loop fastener by turning the handwheel and lower the needle into the hook-and-loop fastener before sewing. And then, sew the edge of the hookand-loop fastener at a slow speed.
If the needle does not pass through the hook-andloop fastener, replace the needle with the needle for thick fabrics.
 |
 Edge of the hook-and-loop fastener |
Related FAQs
AS1430S, BC-2500, CAMPUS 300, DS-140, ES-2000, ES-2400, F14, F17, FS101, FS155, GS1700, GS1710, GS2700, GS2786K, GS3700, Innov-is 1000, Innov-is 1250, Innov-is 1250D, Innov-is 1500D/1500, Innov-is 20, Innov-is 4000D/4000, Innov-is 950, Innov-is 955, Innov-is 980D, Innov-is I / Innov-is 6000D, Innov-is VM6200D, Innov-is VQ2, Innov-is VQ3000, JS1400, K14, K17, LS-2125/2160, LS-2150, LS-2720, LX27NT, MS25, MS25P, MS25Q, NB1700, NX-250, NX-450, NX-650, PQ-1500/1500S, PQ1500SL, QC-1000, Rose Wine, SF100, SF200, SF250, SF2700, SF300, SF3700, T3125, Vesta, Vesto, XL-2120/2220/2230/2240, XL-2600/2620/2630, XL3500
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.