HL-L2320D
FAQs & Troubleshooting |
HL-L2320D
Date: 06/06/2023 ID: faq00100729_001
I cannot print or scan via USB on Fedora 38 or later and on their derivatives (Linux)
To be able to print or scan, do one of the following:
If you have one Brother machine
- Make sure that the machine is turned on.
- If you have already installed the Brother printer driver or scanner driver, uninstall them.
- Connect the machine to your computer using a USB cable.
- > Click here to download the patch file (4 KB)
-
Run the following command using the command line to install the downloaded patch:
sudo rpm -ihv brotherlegacyusb-1.1.1-0.noarch.rpm
-
Disconnect the USB cable from your machine, wait a few seconds, and then reconnect the USB cable.
-
Install the Brother printer driver or scanner driver again.
If you have multiple Brother machines
- Make sure that the machines are turned on.
- If you have already installed the Brother printer drivers and scanner drivers, uninstall them.
- Connect the machines to your computer using USB cables.
- > Click here to download the patch file (4 KB)
-
Run the following command using the command line to install the downloaded patch:
sudo rpm -ihv brotherlegacyusb-1.1.1-0.noarch.rpm
- Disconnect the USB cables from the machines, wait a few seconds, and then reconnect the USB cables.
- Install the Brother printer drivers and scanner drivers again.
DCP-J100, DCP-J105, DCP-J152W, DCP-L2540DW, DCP-T300, DCP-T500W, DCP-T700W, HL-L2320D, HL-L2365DW, MFC-J200, MFC-J2310, MFC-J2320, MFC-J2720, MFC-J3520, MFC-J3720, MFC-L2700D, MFC-L2700DW, MFC-L2740DW, MFC-T800W
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.