MFC-8840DN
FAQs & Troubleshooting |
MFC-8840DN
Date: 29/01/2019 ID: faq00100619_000
When I scan multiple page documents using the ADF, all pages are feeded, but only page 1 shows in XSANE. (Linux)
For XSANE 0.98 or earlier :
You will have to modify the multipage scanning option in XSANE.
In XSANE, click on Preferences, Setup, Enhancements. Change the "Automatic document Feeder Modus:" from "None" to " Automatic Document Feeder".
For XSANE 0.99 or later :
You will have to indicate the number of pages. Increase the number in the box at the top left corner on the XSANE main window.
DCP-195C, DCP-375CW, DCP-7030, DCP-7040, DCP-8060, DCP-8065DN, DCP-8070D, DCP-8085DN, FAX-2820, MFC-210C, MFC-255CW, MFC-290C, MFC-3360C, MFC-4800, MFC-490CW, MFC-6490CW, MFC-7220, MFC-7340, MFC-7420, MFC-7440N, MFC-7820N, MFC-790CW, MFC-795CW, MFC-8370DN, MFC-8380DN, MFC-8440, MFC-8460N, MFC-8480DN, MFC-8840DN, MFC-8860DN, MFC-8880DN, MFC-8890DW, MFC-9010CN, MFC-9120CN, MFC-9440CN, MFC-9840CDW, MFC-J410, MFC-J415W
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.