How to set the Cutter
Movie: How to set the Cutter
*The video clip is being streamed from YouTube.
Make sure you disconnect the printer from the AC power outlet.
Place the printer upside down.
Remove the front cover base using a flathead screwdriver.
Remove the front cover using a flathead screwdriver.
Attach the cutter using a flathead screwdriver.
Connect the connector of the cutter to the printer.
Reattach the front cover base using a flathead screwdriver.
After attaching the cutter, set the printer driver cutting options.
Turn on the printer.
Open the printer preferences menu as follows:
Windows 10 / Windows Server 2016 / Windows Server 2019:
Click Start > Settings > Devices > Printers & scanners.
Click the printer you want to set up, and then click Open queue > Printer > Printing Preferences.
Windows 8 / Windows 8.1 / Windows Server 2012 / Windows Server 2012 R2:
Click Control Panel in the Apps screen. Click Hardware and Sound > Devices and Printers.
Right-click the printer you want to set up, and then click the Printing preferences menu.
Windows 7 / Windows Server 2008 / Windows Server 2008 R2:
Click Start > Devices and Printers. Right-click the printer you want to set up, and then click the Printing preferences menu.
- Check the Cut Every check box, and then select where to cut when multiple labels are printed.
Check the Cut at End check box.
- Click OK.
Label Cutting Options
|Cut at End||Image|
|On||On or Off|
TD-4410D, TD-4420DN, TD-4520DN
If you need further assistance, please contact Brother customer service:
Please note this form is used for feedback only.