FAQs & Troubleshooting

Close

Model discontinued. This page is no longer updated.

PT-1100

FAQs & Troubleshooting

FAQs & Troubleshooting

Date: 02/06/2020 ID: faqp00000117_000

The tape does not feed properly or the tape gets stuck inside the machine.

Please check the following:

 

  • Check that the end of the tape feeds under the tape guide. If the tape is out of the guide, it will feed out in the wrong direction. You can reinsert the tape under the tape guide as follows:

    Image

  • Check the installation of the Cutter unit (two yellow plastic parts). There should be a gap about 1/16" inch between them for the tape to feed out. If the Cutter unit is blocking the tape coming out, try removing the Cutter unit and reinstalling it back into the machine. The Cutter unit should go straight down into the machine, so, do not twist the cutter when pushing it into the machine.

    Image

  • Try another cassette tape.

Related Models

PT-1100

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.