QC-1000
FAQs & Troubleshooting |
QC-1000
Date: 21/03/2013 ID: faqh00000686_000
For better results when sewing stretch fabrics
To achieve better results when sewing your project with stretch fabrics, refer to the following tips.
- To avoid skipped stitches, use ball point needle (golden colored) 90/14 when sewing on stretch fabrics.
- Use thread for knits or a stretch stitch.
- First, baste the pieces of fabric together, and then sew without stretching the fabric.
(1) Basting
- Place thin paper or stabilizer material under the fabric and sew it together with the fabric.
* When you have finished sewing, tear off any excess paper.
(2) Stabilizer material or thin paper
- Decrease the pressure of the presser foot. (It is applied to models equipped with the function to adjust the presser foot pressure)
BC-2100/BC-2100PRW, DS-140, FS101, FS50, Innov-is 1500D/1500, Innov-is 50, Innov-is 55P, Innov-is 950, Innov-is 980D, Innov-is 980K, NX-400Q/400, NX-600, QC-1000
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.