NX-400Q/400
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/hf_nx400qeas.jpg)
NX-400Q/400
Date: 12/12/2018 ID: faqh00000017_002
How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- Use only the ungummed hook-and-loop fastener which is for sewing. If the glue is attached to the needle or the bobbin hook race, it may cause malfunction.
- If the hook-and-loop is sewn with the thin needle (65/9-75/11), the needle may bend or break.
- Before start sewing, baste together the fabric and the hook-and-loop fastener.
Make sure that the needle passes through the hookand-loop fastener by turning the handwheel and lower the needle into the hook-and-loop fastener before sewing. And then, sew the edge of the hookand-loop fastener at a slow speed.
If the needle does not pass through the hook-andloop fastener, replace the needle with the needle for thick fabrics.
![]() |
![]() |
Related FAQs
AS1430S, AS2730S, BC-2100/BC-2100PRW, BM-3500/2600, DS-140, FS101, FS50, GS2700, GS2786K, GS3700P, HF37, Innov-is 1500D/1500, Innov-is 50, Innov-is 55P, Innov-is 950, Innov-is 980D, Innov-is 980K, JA1400, JA1450NT, JK17B, JS1410, JV1400, LS-2125/2160, NX-400Q/400, NX-600, PQ1500SL, QC-1000
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.