MFC-J2330DW
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/mfcj2330dw_eu_as_cn.jpg)
MFC-J2330DW
Date: 09/05/2017 ID: faq00003017_503
Copy an ID Card
Use the [2in1(ID)] feature to copy both sides of an identification card onto one page, keeping the original card size.
![](/g/b/img/faqend/faq00003017_503/th/en/1464809/GUID-8B30C323-927E-4E0A-86BD-DEE99D5184F2-low.gif)
Make sure the paper size is set to A4 or Letter.
- You may copy an identification card to the extent permitted under applicable laws. For more information, see the Product Safety Guide.
MFC-J2330DW/MFC-J5330DW
- Place your identification card face down near the upper-left corner of the scanner glass.
- 3 mm or greater (top, left)
- 207 mm
- 145 mm
- scannable area
- Press
[Copy].
- Enter the number of copies in one of the following ways:
- Press [-] or [+] on the Touchscreen.
- Press
to display the keyboard on the Touchscreen, and then enter the number of copies using the Touchscreen keyboard. Press [OK].
- Enter the number of copies using the dial pad.
- Press .
- Read and confirm the displayed list of settings you have selected. When you have finished changing settings, press [OK].
- Press [Mono Start] or [Colour Start].The machine starts scanning one side of the identification card.
- After the machine has scanned the first side, turn over the identification card and press [Continue] to scan the other side.
MFC-J2730DW/MFC-J5730DW/MFC-J5930DW
- Place your identification card face down near the upper-left corner of the scanner glass.
- 3 mm or greater (top, left)
- 207 mm
- 145 mm
- scannable area
- Press
[Copy].
- Enter the number of copies in one of the following ways:
- Press [-] or [+] on the Touchscreen.
- Press
to display the keyboard on the Touchscreen, and then enter the number of copies using the Touchscreen keyboard. Press [OK].
- Enter the number of copies using the dial pad.
- Press .
- Read and confirm the displayed list of settings you have selected. When you have finished changing settings, press [OK].
- Press [Mono Start] or [Colour Start].The machine starts scanning one side of the identification card.
- After the machine has scanned the first side, turn over the identification card and press [Continue] to scan the other side.
MFC-J2330DW, MFC-J2730DW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.