HL-4150CDN
FAQs & Troubleshooting |
HL-4150CDN
Date: 06/09/2010 ID: faq00002707_000
Offset image
Please check the following points to solve the problem:
NOTE: The illustration shown below is from a representative product, and may differ from your Brother machine.
- Check the machine's environment. Conditions such as high humidity and high temperatures may cause this print quality problem.
- Check that you use the paper that meets our specifications. Click here to see the details of the recommended paper.
- Make sure that the media type setting in the driver matches the type of paper you are using.
- Make sure that the two gray levers inside the back cover, one on the left-hand side and one on the right-hand side, are in the up position.
- The drum unit or toner cartridges may not be installed correctly. Re-install the drum unit and toner cartridges.
- The drum unit may be damaged. Put in a new drum unit. Click here to see the details of how to replace the drum unit.
HL-4150CDN, HL-4570CDW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.