DCP-T420W
 |
FAQs & Troubleshooting |
DCP-T420W
Date: 01/03/2024 ID: faq00000460_519
Reset Your Machine
The following reset functions are available.
Machine Reset
You can reset all the machine’s settings that you have changed, such as Date and Time.
- Press
(Stop) and Mono Start simultaneously. The Power LED, Warning LED, and Ink LED light up for one second, and then the Warning LED starts blinking. - Press and hold Mono Start for two seconds.The machine restarts.
Network (DCP-T420W/DCP-T425W)
Reset the print server back to its default factory settings (includes Password and IP Address information).
- Press WiFi Button/LED and(Stop) simultaneously. The Power LED, Warning LED, and Ink LED light up for one second, and then the WiFi Button/LED starts blinking.
- Press and hold Colour Start for two seconds.The machine restarts.
All Settings
Use this reset function to reset all machine's settings to the settings originally set at the factory.
Brother strongly recommends you perform this operation when you dispose of the machine.
- Press(Stop) and Mono Start simultaneously. The Power LED, Warning LED, and Ink LED light up for one second, and then the Warning LED starts blinking.
- Press and hold Colour Start for two seconds.The machine restarts.
DCP-T220, DCP-T420W, DCP-T426W
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.