FAQs & Troubleshooting

Close

MFC-T920DW

FAQs & Troubleshooting

FAQs & Troubleshooting

MFC-T920DW

Not your product?

Date: 13/10/2022 ID: faq00000027_525

Print the Network Configuration Report

The Network Configuration Report lists the network configuration, including the network print server settings.
image
  • Node Name: The Node Name appears on the current Network Configuration Report. The default Node Name is "BRNxxxxxxxxxxxx" for a wired network or "BRWxxxxxxxxxxxx" for a wireless network (where "xxxxxxxxxxxx" is your machine's MAC Address / Ethernet Address.)
  • If the IP Address on the Network Configuration Report shows 0.0.0.0, wait for one minute and try printing it again.
  • You can find your machine's settings, such as the IP address, subnet mask, node name, and MAC Address on the report, for example:
    • IP address: 192.168.0.5
    • Subnet mask: 255.255.255.0
    • Node name: BRN000ca0000499
    • MAC Address: 00-0c-a0-00-04-99

DCP-T520W/DCP-T525W/DCP-T720DW/DCP-T725DW/DCP-T820DW/DCP-T825DW

  1. Press Menu.
  2. Press image or image to select the [Print Reports] option. Press OK.
  3. Press image or image to select the [Network Config] option. Press OK.
  4. Press the Mono Start or Colour Start button.
    The machine prints the current Network Configuration Report.

MFC-T920DW/MFC-T925DW

  1. Press Settings.
  2. Press image or image to make your selections:
    1. Select [Print Reports]. Press OK.
    2. Select [Network Config]. Press OK.
  3. Press image.
    The machine prints the current Network Configuration Report.

Related Models

DCP-T520W, DCP-T720DW, DCP-T820DW, MFC-T920DW

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.