FAQs & Troubleshooting

Close

TD-4410D

FAQs & Troubleshooting

FAQs & Troubleshooting

Date: 03/04/2024 ID: faqp00100447_000

How to set the Peeler

Movie: How to set the Peeler (except for TD-4420DN(FC)/4550DNWB(FC))

*The video clip is being streamed from YouTube.

 

 

> To attach the Label Peeler (except for TD-4420DN(FC)/4550DNWB(FC)):

> To change the Label Peeler Options (except for TD-4420DN(FC)/4550DNWB(FC)):

 

Attach the Label Peeler (except for TD-4420DN(FC)/4550DNWB(FC))

 

  1. Make sure you disconnect the printer from the AC power outlet.
     
  2. Place the printer upside down.
     
  3. Remove the front cover base using a flathead screwdriver.

  4. If the cutter is attached, remove the connector.

  5. Remove the cutter or the front cover using a flathead screwdriver.

  6. Attach the peeler using a flathead screwdriver.

     
  7. Connect the connector of the peeler to the printer.

  8. Reattach the front cover base using a flathead screwdriver.

 

Change the Label Peeler Options (except for TD-4420DN(FC)/4550DNWB(FC))

 

After attaching the peeler, set the printer driver peeler option.

 

  1. Turn on the printer.
     
  2. Open the printer preferences menu as follows:

    Windows 11
    Click Start > Settings > Bluetooth & devices > Printers & scanners.
    Click the printer you want to set up, and then click Open print queue > Printer > Printing Preferences....

    Windows 10 / Windows Server 2016 / Windows Server 2019:
    Click Start > Settings > Devices > Printers & scanners.
    Click the printer you want to set up, and then click Open queue > Printer > Printing Preferences.

    Windows 8 / Windows 8.1 / Windows Server 2012 / Windows Server 2012 R2:
    Click Control Panel in the Apps screen. Click Hardware and Sound > Devices and Printers.
    Right-click the printer you want to set up, and then click the Printing preferences menu.

    Windows 7 / Windows Server 2008 / Windows Server 2008 R2:
    Click Start > Devices and Printers. Right-click the printer you want to set up, and then click the Printing preferences menu.
     
  3. Check the Use Peeler Function check box.
     
  4. Click OK.

Related Models

TD-4410D, TD-4420DN, TD-4550DNWB

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.