FAQs & Troubleshooting

Close

HL-3070CW

FAQs & Troubleshooting

FAQs & Troubleshooting

HL-3070CW

Not your product?

Date: 09/26/2011 ID: faq00002541_001

Clean the paper pick-up roller

Follow the procedure below to clean the paper pick-up roller.

  • DO NOT use cleaning materials that contain ammonia, alcohol, any type of spray, or any type of flammable substance to clean the outside or inside of the machine. Doing this may cause a fire or electrical shock.
    Do Not Use
  • Be careful not to inhale toner.
  1. Turn off the printer power switch and then unplug the printer.

    Turn Off Printer


  2. Pull the paper tray completely out of the printer.

    Pull Paper Tray


  3. Tightly wring out a lint-free cloth soaked in lukewarm water, and then wipe the separator pad (1) of the paper tray with it to remove dust.

    Clean Separator Pad


  4. Wipe the two pick-up rollers (1) inside of the printer to remove dust.

    Clean Pick-Up Rollers


  5. Put the paper tray back in the printer.
    Put Paper Tray

  6. Plug the printer back in, and then turn on the power switch.

Related Models

HL-3040CN, HL-3070CW

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.