PR670E / PR670EC
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/hf_pr670eeas.jpg)
PR670E / PR670EC
Date: 07/31/2017 ID: faqh00100323_000
"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
The motor has locked up due to tangled thread or for other reasons related to thread delivery.
- If the thread is tangled, remove the thread tangled in the machine, and then rethread the upper thread.
- If the bobbin thread is tangled in the hook, remove the thread jammed and clean the hook. Reinstall the bobbin and bobbin case correctly.
- Check the condition of the needle. If the needle is broken, bent or blunt, replace the needle with a new one.
PR-1000, PR1000e, PR1050X, PR1055X, PR1X, PR670E / PR670EC, PR680W / PR680WC, VR
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.