QC-1000
 |
FAQs & Troubleshooting |
QC-1000
Date: 03/21/2013 ID: faqh00000686_000
For better results when sewing stretch fabrics
To achieve better results when sewing your project with stretch fabrics, refer to the following tips.
- To avoid skipped stitches, use ball point needle (golden colored) 90/14 when sewing on stretch fabrics.
- Use thread for knits or a stretch stitch.
- First, baste the pieces of fabric together, and then sew without stretching the fabric.
(1) Basting
- Place thin paper or stabilizer material under the fabric and sew it together with the fabric.
* When you have finished sewing, tear off any excess paper.
(2) Stabilizer material or thin paper
- Decrease the pressure of the presser foot. (It is applied to models equipped with the function to adjust the presser foot pressure)
BC-2100/BC-2100PRW, BC-2500, CS-6000/6000b/6000t, DS-120, DS-140, FS101, Innov-is 10, Innov-is 1000, Innov-is 1200, Innov-is 1250, Innov-is 1250D, Innov-is 1500D/1500, Innov-is 15P, Innov-is 200/200QE, Innov-is 30, Innov-is 35P, Innov-is 400, Innov-is 4000D/4000, Innov-is 4500D, Innov-is 50, Innov-is 55P, Innov-is 600, Innov-is 900, Innov-is 950, Innov-is 955, Innov-is 980D, Innov-is 980K, Innov-is 985D, Innov-is I / Innov-is 6000D, Innov-is Ie, Innov-is V7, NX-200/200QE, NX-250, NX-400Q/400, NX-450, NX-600, QC-1000
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.