DCP-T426W
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/dcpt426w_all.jpg)
DCP-T426W
Date: 03/01/2024 ID: faq00003017_512
Copy an ID Card
Use the 2 in 1 ID feature to copy both sides of an identification card onto one page, keeping the original card size.
![image](/g/b/img/faqend/faq00003017_512/sg/en/2538907/GUID-121D8702-74FF-4E15-AE4B-C0044886EF7E-low.gif)
- Make sure the paper size is set to A4 or Letter.
- You may copy an identification card to the extent permitted under applicable laws. For more detailed information, see the Product Safety Guide.
- Place your identification card face down near the lower-right corner of the scanner glass as shown.
- Press Copy Shortcut.The machine starts scanning one side of the identification card.
- After the machine has scanned the first side, the Power LED blinks slowly. Turn over the identification card and press Copy Shortcut to scan the other side.
![image](/g/b/img/faqend/faq00003017_512/sg/en/2538909/topic1_icon5.png)
You can change the Copy Shortcut button settings using Web Based Management.
DCP-T220, DCP-T226, DCP-T426W
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.