The message "Cannot Detect" will appear on the display of the Brother machine after installing an ink cartridge(s) that is (1) installed too quickly or (2) broken or damaged or (3) a non-Brother cartridge that causes the message to display. Verify the ink cartridges are installed correctly by following the steps listed below:

NOTE: Images shown below are from the representative product and may differ from your Brother machine.

1. Open the ink cartridge cover door.
   
   
2. Push the 4 colored levers down and remove the ink cartridges from the machine.
   
   
   
   
   
   
3. Check that the machine power is turned ON and install the ink cartridges. If the machine is power-off, it cannot detect the ink cartridges are installed.
   
   
4. Each color has its own correct position to match the color of the cartridges with the color of the levers. Reinstall the ink cartridges one at a time. Install the cartridges slowly, in the direction of the arrow on the label until it clicks into place. Continue with the next ink cartridge.
   
   
   
   
   
   
   
   
   
5. After all four cartridges are installed close the ink cartridge cover.
   
   
6. If you replaced an ink cartridge, the LCD may ask you to verify that it was a brand new one. For example, Did You Change Black? For each new cartridge you installed, choose Yes. If the ink cartridge you installed is not a brand new one, be sure to choose No.
   
   
   

   If you mix the colors by installing an ink cartridge in the wrong position, clean the print head several times after correcting the cartridge installation.
   

   Once you open an ink cartridge, install it in the machine and use it up within six months of installation. Use unopened ink cartridges by the expiration date written on the cartridge package.