MFC-L2740DW
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/mfcl2740dw_us_eu_as.jpg)
MFC-L2740DW
Date: 05/11/2015 ID: faq00002595_004
Copy on Both Sides of the Paper (2-sided Copy)
Reduce the amount of paper you use by copying onto both sides of the paper.
- You must choose a 2-sided copy layout from the following options before you can start 2-sided copying.
- The layout of your original document determines which 2-sided copy layout you should choose.
- To use the automatic 2-sided copy feature, you must load your document in the ADF.
- To use the manual 2-sided copy feature, place your document on the scanner glass.
Portrait
2–sided > 2–sided
1–sided > 2–sided Long Edge Flip
2–sided > 1–sided Long Edge Flip
1–sided > 2–sided Short Edge Flip
2–sided > 1–sided Short Edge Flip
Landscape
2–sided > 2–sided
1–sided > 2–sided Long Edge Flip
2–sided > 1–sided Long Edge Flip
1–sided > 2–sided Short Edge Flip
2–sided > 1–sided Short Edge Flip
- Load your document.
-
Press
(Copy).
- Enter the number of copies.
- Press Options.
- Press the Up or Down arrow to display the 2-sided Copy option, and then press 2-sided Copy.
- Press the Up or Down arrow to display the layout options, and then press the option you want.
- When finished, press OK.
-
Press Start. If you placed the document in the ADF, the machine scans the pages and starts printing.
If you are using the scanner glass, go to the next step. -
Repeat the following steps for each page of the document:
- Place the next page on the scanner glass, and then press OK to scan the page.
- After the machine scans the page, press Scan to scan the next page.
- After scanning all the pages, press Complete to finish.
MFC-L2740DW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.