DCP-7060D
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/dcp7060d_all.jpg)
DCP-7060D
Date: 02/04/2011 ID: faq00002041_009
Curled
Please check the following points to solve the problem:
NOTE: Illustrations shown below are from representative product and may differ from your Brother machine.
- Choose Reduce Paper Curl mode in the printer driver when you do not use our recommended paper.
For Windows users:
NOTE: The steps and screens may differ depending on the operating system and application being used.- From the menu bar of an application, click File => Print.
- Check your printer name is chosen and click Properties.
- Click Advanced tab and then Other Print Options.
- Click Improve Print Output and select Reduce Paper Curl.
- Click OK to close the Other Print Options dialogue.
- Click OK to close the Properties dialogue.
- Click OK. The document will be printed.
For Macintosh users:
NOTE: The steps and screens may differ depending on the operating system being used.- Choose "Print" from the File menu and open the Print dialogue.
- Choose "Print Settings" from the print options pop-up menu.
- Click Advanced and then Improve Print Output....
- Select Reduce Paper Curl.
- Click OK.
- Click Print.
- From the menu bar of an application, click File => Print.
- Turn the paper over in the paper tray, and print again. (Excluding letterhead paper)
If the problems remains, switch the Anti-Curl Levers as follows:- Open the back cover.
- Lift the lever (1) and slide the two gray levers (2) in the direction of the arrow.
- Close the back cover and try printing again.
- Open the back cover.
- Lift up the output tray support flap.
DCP-7055, DCP-7060D, DCP-7065DN, MFC-7360, MFC-7470D, MFC-7860DW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.