MFC-9420CN
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/mfc9420cn_all.jpg)
MFC-9420CN
Date: 10/07/2005 ID: faq00000694_003
"Document Jam" error appears on the LCD. What should I do?
If the document is jammed, follow the steps below.
If the Document is jammed in the top of the ADF unit
- Take out any paper from the ADF that is not jammed.
- Open the ADF cover.
- Pull the jammed document out to the left.
![](/g/b/img/faqend/faq00000694_003/sg/en/3529/ASL4C_U_G01842.gif)
- Close the ADF cover.
- Press Stop/Exit.
If the Document is jammed under the document cover
- Take out any paper from the ADF that is not jammed.
- Lift the document cover.
- Pull the jammed document out to the right.
![](/g/b/img/faqend/faq00000694_003/sg/en/3530/ASL4C_U_G0191.gif)
- Close the document cover.
- Press Stop/Exit.
If the Document is jammed at the output tray
- Pull the jammed document out to the right.
![](/g/b/img/faqend/faq00000694_003/sg/en/3531/ASL4C_U_G021.gif)
- Press Stop/Exit.
MFC-9420CN
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.