MFC-L2740DW
FAQs & Troubleshooting |
MFC-L2740DW
Date: 05/11/2015 ID: faq00000299_019
Set the date and time.
To set the date and time, follow the instructions listed below:
- Press (Settings) > All Settings > Initial Setup > Date & Time > Date.
- Enter the last two digits of the year using the LCD, and then press OK.
- Enter the two digits for the month using the LCD, and then press OK.
- Enter the two digits for the day using the LCD, and then press OK.
-
Do one of the following:
-
If the LCD displays Time, press Time.
Enter the time on the Touchscreen in 24-hour format.
-
If the LCD displays Clock Type, press Clock Type.
Press 12h Clock or 24h Clock.
Press OK.
Do one of the following:-
If you chose 12h Clock as the format in the Clock Type setting, enter the time (in 12-hour format) using the LCD.
Press to choose AM or PM.
Press OK. -
If you chose 24h Clock as the format in the Clock Type setting, enter the time (in 24-hour format) using the LCD.
Press OK.
-
If you chose 12h Clock as the format in the Clock Type setting, enter the time (in 12-hour format) using the LCD.
-
- Press (Home).
MFC-L2740DW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.