MFC-8860DN
FAQs & Troubleshooting |
MFC-8860DN
Date: 03/10/2006 ID: faq00000204_013
When receiving a 1 page fax, why does the fax print on 2 pages or a blank sheet ejects afterwards?
If the received data is divided and printed on 2 pages or if you get an additional blank page, your Paper Size setting and/or the Reduction setting may not be correct for the paper you are using.
Adjust the paper size following the instructions listed below:
-
Press Menu.
-
Press the up or down navigation key until General Setup appears on the LCD and press OK.
-
Press the up or down navigation key until Paper Size appears and press OK.
-
Press the up or down navigation key to choose Tray#1.
-
Press OK.
-
Press the up or down navigation key until the paper size you are using appears and then press OK.
-
Press Stop/Exit.
- To set the paper size for the MP Tray, choose MP Tray in STEP 4.
If you installed the optional tray, choose Tray#2 in STEP 4 to set the paper size for the optional tray.
To check the reduction setting:
- If the FAX mode key is not illuminated in blue, press it.
- Press Menu.
- Press the the up or down navigation key until Fax appears on the LCD and press OK.
- Press the up or down navigation key until Setup Receive appears and press OK.
- Press the up or down navigation key until Auto Reduction appears and press OK.
- Press the up or down navigation key until ON (or OFF) appears and press OK.
- Press Stop/Exit.
MFC-8460N, MFC-8860DN
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.