FAX-1360
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/fax1360_all.jpg)
FAX-1360
Date: 05/11/2015 ID: faq00000203_025
Why are the faxes I send always received with a black vertical line down the page?
This type of line is typically caused by dirt or white out (correction fluid) on the scanner unit. The scanner unit is the mechanism that reads the documents that are being sent or copied. This problem is usually resolved by cleaning the scanner glass and white plastic with isopropyl alcohol, and a lint-free cloth.
Please follow the instructions listed below:
-
Unplug the telephone line and then the power cord.
When you re-connect these lines later, make sure to connect the power cord first, then the telephone line.
-
Open the panel cover(1). Clean the white bar(2) and the glass strip(3) with isopropyl alcohol on a soft lint-free cloth.
![](/g/b/img/faqend/faq00000203_025/sg/en/4687/scanner_01.gif)
Do not use isopropyl alcohol to remove dirt from the control panel. It may cause a crack on the panel.
FAX-1360, MFC-3360C
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.