Innov-is 350SE
![]() |
Vanliga frågor & felsökning |
![](/g/b/img/product/hf_inov350seeuk.jpg)
Innov-is 350SE
Datum: 2009-02-26 ID: faqh00000126_000
"Disconnect the foot control." appears on the LCD.
The start/stop button was pressed while the foot controller was connected.
Each time a key is pressed or an incorrect operation is performed, a beep is sounded.
- For a correct operation
One beep is sounded. - If an incorrect operation is performed
Two or four beeps are sounded. - If the machine locks up, for example, because the thread is tangled
The sewing machine continues to beep for four seconds.
The machine automatically stops.
Be sure to check for the cause of the error, and correct it before continuing to sew.
Om du behöver mer hjälp kontaktar du Brothers kundtjänst:
Feedback om innehållet
Hjälp oss att göra vår support bättre genom att lämna din feedback nedan.
Steg 1: Hur hjälper informationen på den här sidan dig?
Steg 2: Vill du lägga till ytterligare kommentarer?
Observera att detta formulär endast används för feedback.