FAQs & Troubleshooting

Close

MFC-T910DW

FAQs & Troubleshooting

FAQs & Troubleshooting

MFC-T910DW

Not your product?

Date: 26/04/2018 ID: faq00000460_504

Reset Your Brother Machine

IMPORTANT
(MFC-T810W/MFC-T910DW)

When you reset the machine, your faxes that are stored in the machine's memory may be deleted. Before you reset the machine, you can transfer your faxes to your computer or another fax machine so you will not lose any important messages.

DCP-T310/DCP-T510W/DCP-T710W/MFC-T810W

  1. Press Menu.
  2. Press or to select the following:
    1. Select [Initial Setup]. Press OK.
    2. Select [Reset]. Press OK.
    3. Select the reset option you want to use. Press OK.
  3. Press for [Reset] to confirm.
  4. Press for [Yes] to reboot the machine.
    The machine restarts.

MFC-T910DW

  1. Press Settings.
  2. Press or to select the following:
    1. Select [Initial Setup]. Press OK.
    2. Select [Reset]. Press OK.
    3. Select the reset option you want to use. Press OK.
  3. Press for two seconds to confirm.
    The machine restarts.

Related Models

DCP-T310, DCP-T510W, DCP-T710W, MFC-T810W, MFC-T910DW

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.