FAQs & Troubleshooting

Close

PT-D210

FAQs & Troubleshooting

FAQs & Troubleshooting

Date: 08/04/2015 ID: faqp00100184_000

How to use the Text Label function

To use the Text Label function,

 

  1. Press the [Template Library] key ( Template Library key / Template Library key  ).
    [Select Category] is displayed.
     
  2. Press the [Cursor] key ( Cursor key ) until [Text] is displayed.
     
  3. Press the [OK] key ( OK key ).
    [Select Design] is displayed.
     
  4. Press the [Cursor] key ( Cursor key ) until your desired design is displayed.
     
  5. Press the [OK] key ( OK key ).
    [Input Text 1] is displayed.
     
  6. Clear the text and then enter the text to be printed.
     
  7. Press the [OK] key ( OK key ).
    [Input Text 2] is displayed.
     
  8. Clear the text and then enter the text to be printed.

    In case you selected a design which does not require input of "Text 2", [Print] is displayed instead of [Input Text 2].

    Go to step 10.

  9. Press the [OK] key ( OK key ).
    [Print] is displayed.
     
  10. Press the [OK] key ( OK key ).


Example (Template that includes two fonts):
When making the following label,

 

Sample Label File No1

 

  1. Press the [Template Library] key ( Template Library key / Template Library key ).
    [Select Category] is displayed.
     
  2. Press the [Cursor] key ( Cursor key ) until [Text] is displayed.
     
  3. Press the [OK] key ( OK key ).
    [Select Design] is displayed.
     
  4. Press the [Cursor] key ( Cursor key ) until File No1 displayed is displayed.
     
  5. Press the [OK] key ( OK key ).
    [Input Text 1] is displayed.
     
  6. Clear the text and then enter "File".
     
  7. Press the [OK] key ( OK key ).
    [Input Text 2] is displayed.
     
  8. Clear the text and then enter "No. 1".
     
  9. Press the [OK] key ( OK key ).
    [Print] is displayed.
     
  10. Press the [OK] key ( OK key ). 

 

  • The procedure is similar in case of the templates that include two fonts and a frame, and the templates that include two fonts on two lines.
  • Templates are only available when using 12 mm / 0.47″ wide tape cassettes.
  • You cannot save labels created using templates to memory.

Related Models

PT-D210

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.