FAQs & Troubleshooting

Close

PT-P750W

FAQs & Troubleshooting

FAQs & Troubleshooting

Date: 27/11/2020 ID: faqp00100007_000

The printed label is shorter or longer than the actual label data.

For Windows:

You can adjust the length by using the Printer Setting Tool.

 

  1. Open the Printer Setting Tool.
    Refer to "Using the Printer Setting Tool (for Windows)".
     
  2. Click Device settings.
    The Device settings window appears.
     
  3. Select a value for Length adjustment in Calibration from the drop-down list.
    The available values are: +3%, +2%, +1%, 0%, -1%, -2% and -3%.
    Device settings

 

For Mac:

You can adjust the length by using the P-touch Utility. (For macOS 10.15 or earlier)

For PT-D800W/E800W:

Use the Printer Setting Tool. (Refer to "Using the Printer Setting Tool (for Mac)".)

 

  1. Open the P-touch Utility.
    Refer to "Using the P-touch Utility".
     
  2. Click Print tab. 
     
  3. Select a value for Settings in Length adjustment from the drop-down list.
    The available values are: +3%, +2%, +1%, 0%, -1%, -2% and -3%.
    Print-Calibration

Related FAQs

Related Models

PT-D800W, PT-P750W

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.