MFC-7440N
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/mfc7440n_all.jpg)
MFC-7440N
Date: 31/01/2012 ID: faq00002732_012
Send a fax
- If you know how to send a fax but are having problems sending, click here.
- If you are using Voice Over Internet Protocol (VoIP), please refer to the Related FAQ's at the end of the page.
VoIP is a type of phone system that uses an internet connection instead of a traditional phone line.
Step1: Verify you hear the dial tone- To verify your Brother machine has a dial tone. (Click here to see the details of how to verify that my Brother machine has a dial tone.)
- If there is dial tone, go to STEP 2.
- If there is no dial tone, verify the telephone line cord is directly connected from the Brother machine's LINE jack (socket) to the wall telephone jack (socket).
- If you are using an analog telephone line and there are splitters, commshare devices, power strips or surge protectors between the wall telephone jack (socket) and the Brother machine, please remove them. Removing these devices assists in determining if the issue is related to the device or the Brother machine.
- If you are using a DSL or Voice Over Internet Protocol (VoIP) telephone system, there can be multiple types of telephone line connections (modems, interface boxes, phone adapters, splitters, etc). However, a telephone line must be connected to the Brother machine's LINE jack (socket).
- If you are using an analog telephone line and there are splitters, commshare devices, power strips or surge protectors between the wall telephone jack (socket) and the Brother machine, please remove them. Removing these devices assists in determining if the issue is related to the device or the Brother machine.
- If there is dial tone, go to STEP 2.
- If there is still no dial tone, click here to see points to be checked when your Brother machine has no dial tone.
Step2: Send a fax following one of these fax-sending procedures
- Send a fax using your Brother machine's Automatic Document Feeder (ADF)
- Send a fax using your Brother machine's flat scanner glass
For the models with an ADF (Automatic Document Feeder):
- Press the FAX key to illuminate it.
- Place the document(s) you want to fax face up in the ADF.
After you put your document(s) in the ADF, the Brother machine's LCD should display "ADF Ready" for a few seconds and then display the fax-sending options.
- Enter the fax number you want to send to.
You can manually dial the number or use a One Touch or Speed Dial number.
- Press Start.
Your Brother machine will scan and fax the document.
You can press Stop/Exit to cancel the fax.
Send a fax using your Brother machine's flat scanner glass- You can send documents up to Letter or A4 size.
- Since you can only scan one page at a time on the flat scanner glass, it is easier to send multipage faxes using the ADF.
- Press the FAX key to illuminate it.
- Place the document you want to fax face down on the flat scanner glass.
- Enter the fax number you want to send to.
You can manually dial the number or use a One Touch or Speed Dial number.
- Press Start.
The machine will scan the first page.
- Do one of the following:
- To send a single-page fax, press Start again or press 2 to choose No.
The machine will send the fax.
- To send more than one page, press 1 to choose Yes. Go to STEP 6.
- To send a single-page fax, press Start again or press 2 to choose No.
- Place the next page you want to fax face down on the flat scanner glass.
- Press OK or Menu/Set.
Your Brother machine will scan the next page.
Repeat STEPS 5 through 7 for each additional page you want to fax.
- After all pages have been scanned, press 2 or Start to start.
Related FAQs
MFC-7320, MFC-7340, MFC-7420, MFC-7440N, MFC-7450, MFC-7840N
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.