MFC-T910DW
 |
FAQs & Troubleshooting |
MFC-T910DW
Date: 23/05/2019 ID: faq00000615_009
Forward a fax to another fax machine when my machine has a mechanical issue.
You can transfer faxes in the memory of your machine if one of the following messages is displayed on the machine's display (hereinafter called LCD):
- Unable to Clean XX (Clean Unable XX)
- Unable to Initialize XX or Unable to Init. XX (Init Unable XX)
- Unable to Print XX (Print Unable XX)
- Unable to Scan XX (Scan Unable XX)
- Press Stop/Exit to interrupt the error temporarily.
- Press Settings and select Service > Data Transfer > Fax Transfer.
-
Do one of the following:
-
If the LCD displays No Data, there are no faxes left in the machine's memory.
Press
, and then press Stop/Exit. - Enter the fax number where faxes will be forwarded.
-
If the LCD displays No Data, there are no faxes left in the machine's memory.
- Press Black (Mono) Start.
-
If you have not set up your Station ID, you cannot enter Fax Transfer mode.
> Click here to see how to set up the Station ID. -
You can send the Fax Journal report to another fax machine.
Press Settings and select Service => Data Transfer => Report Trans. in STEP 2.
MFC-T910DW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.