HL-5250DN
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/hl5250dn_all.jpg)
HL-5250DN
Date: 22/09/2011 ID: faq00000504_002
Where is the Auto 2-sided(Duplex) setting option in the Mac OS X 10.3 driver or greater?
Refer to the instructions below:
Automatic 2-sided(duplex) printing from the paper tray
- Choose "Print" from the File menu and open the Print dialogue.
- Choose "Layout". You will find the "Two-Sided" section.
- Choose "Long-edged binding" or "Short-edged binding".
![](/g/b/img/faqend/faq00000504_002/ph/en/13335/5250_autodpx.gif)
- Click on Print.
Automatic 2-sided(duplex) printing from the MP tray
- Open the MP tray and lower it gently.
![](/g/b/img/faqend/faq00000504_002/ph/en/13329/dpx1.gif)
-
Pull out the MP tray support flap.
![](/g/b/img/faqend/faq00000504_002/ph/en/13330/dpx2.gif)
-
Lift up the support flap to prevent paper from sliding off the face-down output tray, or remove each page as soon as it comes out of the printer.
![](/g/b/img/faqend/faq00000504_002/ph/en/13331/dpx3.gif)
- Put paper in the MP tray. Make sure that the paper stays under the maximum paper mark on both sides of the tray.
![](/g/b/img/faqend/faq00000504_002/ph/en/13333/dpx4.gif)
- While pressing the paper-guide release lever, slide the paper guide to fit the paper size.
![](/g/b/img/faqend/faq00000504_002/ph/en/13334/dpx5.gif)
- Choose "Print" from the File menu and open the Print dialogue.
- Choose "Layout". You will find the "Two-Sided" section.
- Choose "Long-edged binding" or "Short-edged binding".
![](/g/b/img/faqend/faq00000504_002/ph/en/13335/5250_autodpx3.gif)
- Click on Print.
Related FAQs
HL-5250DN, HL-5270DN
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.