MFC-7450
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/mfc7450_as.jpg)
MFC-7450
Date: 14/01/2008 ID: faq00000203_028
Why are the faxes I send always received with a black vertical line down the page?
This type of line is typically caused by dirt or white out (correction fluid) on the scanner unit. The scanner unit is the mechanism that reads the documents that are being sent or copied. This problem is usually resolved by cleaning the scanner unit.
Please follow the instructions listed below:
- Turn off the machine's power switch. Unplug the telephone line cord first, disconnect all cables, and then unplug the power cord from the AC power outlet.
- Lift the document cover.
In the ADF unit, clean the white bar (1) and the scanner glass strip (2) under it with a soft lint-free cloth moistened with water.
In addition to cleaning the glass strip with a soft lint-free cloth moistened with water, run your finger tip over the glass strip to see if you can feel anything on it. If you feel dirt or debris, clean the glass strip again concentrating on that area. You may need to repeat the cleaning process three or four times. To test, make a copy after each cleaning.
![](/g/b/img/faqend/faq00000203_028/ph/en/11926/scannerglass_03.gif)
- Plug the machine's power cord back into the AC power outlet first, and reconnect all cables and telephone line cord. Turn on the machine's power switch.
MFC-7320, MFC-7340, MFC-7440N, MFC-7450, MFC-7840N
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.