HL-5140
FAQs & Troubleshooting |
HL-5140
Date: 23/03/2016 ID: faq00000126_000
What can happen if the wrong paper is used in your machine.
Brother strongly recommends that customers do not use the wrong type of paper in the machine, as it can cause paper jams and damage to the machine, which may not be covered by warranty.
Following are examples of the wrong type of paper or the damage it can cause:
-
Glossy paper for Inkjet printers
-
Transparent film or labels
-
Paper with perforations
-
Extremely thin paper
-
Envelope with an open flap
-
Envelope with a sticky flap
-
Preprinted paper
-
Leaflet or flyer
-
Iron transfer sheet or Iron print paper
-
Envelope with Double-Faced Tape
-
Envelope with films
-
Paper with sticky notes
-
Paper with a piece of tape
-
Paper with a staple
-
Paper with a clip
DCP-7010, DCP-9040CN, DCP-L2540DW, DCP-L2550DW, FAX-2820, FAX-2840, FAX-2850, FAX-2920, FAX-2950, HL-1230, HL-1240, HL-1250, HL-1270N, HL-1440, HL-1450, HL-1470N, HL-1650, HL-1670N, HL-1850, HL-1870N, HL-2030, HL-2040, HL-2070N, HL-2140, HL-2150N, HL-2170W, HL-2270DW, HL-2700CN, HL-3040CN, HL-3070CW, HL-3150CDN, HL-3170CDW, HL-3260N, HL-4040CDN, HL-4050CDN, HL-4150CDN, HL-4200CN, HL-4570CDW, HL-5040, HL-5050, HL-5070N, HL-5140, HL-5150D, HL-5170DN, HL-5240, HL-5250DN, HL-5270DN, HL-5340D, HL-5350DN, HL-5370DW, HL-5440D, HL-5450DN, HL-5470DW, HL-6050D, HL-6050DN, HL-6180DW, HL-7050, HL-7050N, HL-8050N, HL-L2365DW, HL-L2375DW, HL-L3230CDN, HL-L3270CDW, HL-L5100DN, HL-L6400DW, HL-L8250CDN, HL-L8350CDW, HL-L8360CDW, MFC-4800, MFC-7220, MFC-7290, MFC-7420, MFC-8220, MFC-8440, MFC-8460N, MFC-8820D, MFC-8840DN, MFC-8860DN, MFC-9010CN, MFC-9120CN, MFC-9140CDN, MFC-9160, MFC-9180, MFC-9320CW, MFC-9330CDW, MFC-9420CN, MFC-9440CN, MFC-9660, MFC-9840CDW, MFC-9880, MFC-9970CDW, MFC-L2700D, MFC-L2700DW, MFC-L2740DW, MFC-L2750DW, MFC-L3735CDN, MFC-L3770CDW, MFC-L5900DW, MFC-L6900DW, MFC-L8850CDW, MFC-L8900CDW, MFC-L9550CDW
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.